Cleanair®Air Shower
“Cleanair®” make Air Showers are installed to remove loose lint, air borne dirt, dust particles, thread ends, hair, etc. when an individual walkthrough this specially constructed chamber. The high velocity air from jet nozzles ensures efficient scrubbing action necessary to remove particulate matter. Contaminated air then recirculated through F8 grade 5 micron Return Air filters located on the sidewalls and H14 grade HEPA filters.
Air showers doors are provided with Interlocking system by electromagnets. Shower duration is controlled by adjustable electronic timer 0 to 120 seconds and fully automatic and sensor-based PLC controller with LED display.
Air Showers are fabricated by using pre-treated 18gauge Galvanized Iron sheets with anti-microbial Polyurethane paint coated finish or IS 304 grade stainless steel sheets. These Air showers are used in manufacturing industries like food processing industries, pharmaceuticals and biotechnology industries, automobile industries, electronics industries and semi-conductor industries, etc. Air showers are generally installed in places where minimum number of employees are working. We recommend to install Air Tunnels in places where a greater number of employees are working.
Model Nos. | Width mm Inner/Outer | Depth mm Inner/Outer | Height mm Inner/Outer |
---|---|---|---|
CAS 900 | 900 / 1600 | 1000 / 1100 | 2000 / 2200 |
CAS 1800 | 900 / 1600 | 2000 / 2100 | 2000 / 2200 |
* Customized sizes are also available




