Clean Air Systems
No. 4, Senthil Nagar, 100 Feet Road
Chennai - 600 094, Tamil Nadu, India
Phone: +(91)-(44)-23621476, 23622772
Mobile: 0091 9841074504, 0091 9551119111
Email: ravi@cleanairindia.com
Director’s Note
Performance Highlights
History
Milestones
Core Offerings
Corporate Governance Policies
Leadership Team
Competitive Advantage
Benchmark
Our Centres Of Excellence
Financial Status
 
Clean Air Systems offers a wide range of equipments and accessories that are used throughout the industry.s
Laminar Airflow
Laminar Airflow Cabinets are used as equipment of local workplaces in medical, pharmaceutical and other institutes with high requirements for air cleanliness in the working zone. Cleanair specializes in designing and creating following types of Laminar Airflows.
  • Horizontal Laminar Airflow
  • Vertical Laminar Airflow
  • Ceiling Laminar Airflow
 
Bio-Hazard Safety Cabinet
Laminar airflow enclosures with High Efficiency Particulate Air (HEPA) filtration of exhaust air and an air barrier at the work opening. HEPA-filtered vertical laminar airflow, which is discharged to the work zone, creates an ultra-clean work environment for product protection. An air barrier between the operator and the work zone is maintained by a flow of room air into a full width grille in the work opening.  The barrier air mixes with the laminar flow air in a sump underneath the work surface, and is exhausted to the outside environment via a HEPA filter and Virus Burn-Out Unit. To contain potentially hazardous aerosols, negative pressure zones surround all the positive pressure zones and Filter sealing.
 
Air Shower Entry System
“Cleanair” made Air Showers employ concentrated airflows to lift off contamination such as lint, dirt, dust etc., while an individual simply moves in or walks through a specially constructed chamber. The high velocity air from jet nozzles ensures efficient scrubbing action necessary to remove particulate matter. Contaminated air then flows through sidewalls of the air shower and flows through pre filters and final HEPA filters.
 
Clean Room Pass Box
"Cleanair”™ Pass Through Box (also known as Clean Pass Box) is designed to minimize traffic and contamination entry into the clean room. It effectively enables parts, tools and other work items to be passed to and from the room. The unit acts as an air lock device preventing ambient air from entering, or clean air from exiting, the clean room. Dynamic pass boxes are provided with vertical laminar airflow.
 
Powder Containment Booths
Cleanair™ make Powder containment booths are used to control the hazardous emissions ofpowders, dust or vapors during powder dispensing, product sampling, or bag dispensing, etc., without risk to the operator or environment. The downdraught prevents airborne dusts caused by weighing and dispensing operations rising into the operator's breathing zone. The dust particles are contained at each level of filtration prior to being re-circulated back into the booths'' air stream.
 
Sterile Garment Cabinet
Cleanair™ make Garment Storage Cabinets provide the premium solution to meet your garment storage needs while making a positive contribution to maintaining the cleanliness of your controlled cleanroom environment. Cleanroom garments can accumulate particulate contamination during storage and between laundry washes, which in turn may lead to lower product yields and increased product quality issues.
 
Softwall Clean Room
Cleanair™ softwall cleanroom utilizes the most economical approach and design for your cleanroom needs. This design is commonly used in the microelectronics and medical mold injection industry as well as many others. Cleanair™ Tent's softwall design allows it to be used as either a totally freestanding room or it can be used in combination with your existing walls and ceiling. Each room comes completely factory prefabricated for minimal on-site erection time and is totally self-contained with all components factory-finished.
 
Modular Clean Room
Cleanair Pre-Fabricated modular cleanrooms are designed to provide a dust free and clean environment in a specific and isolated area for conducting any R&D work or assembling or any specific process activity which demands such cleanroom conditions. These custom built modular cleanrooms are designed in class 100, class 1000, class 10000 cleanliness level as per ISO 16441 Specifications.
 
Positive Pressure Module
As part of its state of the art offerings, Clean Air Systems also offers, top-of-the-line Positive Pressure Modules. These are designed to provide a clean air within a small enclosure. The Positive Pressure modules are designed and working on the principle similar to that of the Laminar Airflow. Pre-filter fixed at the rear end of the unit, a powerful blower assembly is positioned in between the pre-filter and the final filter for creating necessary suction pressure and then the air is passed through the HEPA filter where the filtrations of highest level take place. Positive Pressure Modules designed by Clean Air Systems are unique and offer high value for money.
 
Clean Air Fan Filter Units
Cleanair™ Fan Filter Units are self-contained, motorized Supply Air Modules equipped with either HEPA or ULPA filters. Our FFU's can be used in either horizontal or vertical flow positions, wherever clean air is needed. The clean air fan filter module includes a fan shroud, a fan/motor mount, a centrifugal fan, a fan motor, and a HEPA filter, the fan shroud having an air inlet and two inclined ends, the fan/motor mounted below the air inlet on the fan/motor mount, the centrifugal fan blowing air radially towards the fan shroud, the HEPA filter constituting the air outlet.
 
Laboratory Fume Exhaust Hoods
Cleanair Pre-Fabricated modular cleanrooms are designed to provide a dust free and clean environment in a specific and isolated area for conducting any R&D work or assembling or any specific process activity which demands such cleanroom conditions. These custom built modular cleanrooms are designed in class 100, class 1000, class 10000 cleanliness level as per ISO 16441 Specifications.
 
Laboratory Furniture
Clean Air Systems specializes in designing and manufacturing Lab Furniture. Both with minimum and maximum details we can design lab furniture that meet customer specifications. Our range of lab furniture includes: Island Tables, Instrument Tables, Wall Tables, Storage Shelves and Reagent Racks etc. These custom made lab furniture consists of under-bench modular with inner storage shelves, lockable doors, granite working tops, foot rest, reagent racks with power points, water sinks and inlets & outlets etc. Our Lab furniture are made from pre treated galvanized iron sheets, with complete epoxy powder coated finish.
 
Metal Doors
Best quality and aesthetically designed metal doors that are suitable for Pharmaceutical industries, Cleanrooms, Process industries, Hospitals and other institutions and medical facilities. Our reputation in the market segment has been long lasting and we have designed and delivered Metal doors to some of the most prestigious customers. These doors are made of galvanized iron sheets and are completely finished with epoxy powder coat. The doors are made of double layer and polyurethane foam sandwiched in between the layers for thermal insulation. Each and every Metal door is comprised of a heavy-duty metal outer frame and swing type doors connected to the frame with the help of stainless steel hinges.
 
Home   l   About Us   l   Products   l   Recommended Practices   l   Feedback   l   FAQ   l   Sitemap   l   Contact Us © Clean Air Systems 2010
design: mayuri infomedia